The DDG, DUG and HL series are stationary electric lift tables built for pallet and skid handling at floor level. Their low closed heights let loads move onto the platform without a deep pit, while the scissor mechanism raises the table to a comfortable working position.
DDG, DUG and HL model range
The catalogue lists standard platform tables, U-shaped tables for pallet access and an ultra-low range with a 35 mm closed height.
| Model | Table type | Load | Min. height | Max. height | Table size | U-opening | Voltage | Net weight |
|---|---|---|---|---|---|---|---|---|
| DDG1000 | Standard | 1,000 kg | 85 mm | 860 mm | 1450 x 1140 mm | – | 380 / 220 V | 280 kg |
| DDG1500 | Standard | 1,500 kg | 105 mm | 860 mm | 1600 x 1200 mm | – | 380 / 220 V | 380 kg |
| DDG2000 | Standard | 2,000 kg | 105 mm | 860 mm | 1600 x 1200 mm | – | 380 / 220 V | 380 kg |
| DUG1000 | U-shaped | 1,000 kg | 85 mm | 860 mm | 1450 x 1140 mm | 1080 x 580 mm | 380 / 220 V | 240 kg |
| DUG1500 | U-shaped | 1,500 kg | 105 mm | 860 mm | 1600 x 1200 mm | 1194 x 580 mm | 380 / 220 V | 370 kg |
| HL1000 | Ultra-low | 1,000 kg | 35 mm | 810 mm | 1270 x 1100 mm | – | 380 / 220 V | – |
| HL1500 | Ultra-low | 1,500 kg | 35 mm | 810 mm | 1270 x 1100 mm | – | 380 / 220 V | – |
How does the low-profile design support pallet handling?
The HL series closes to 35 mm, which the catalogue describes as requiring no pit installation and no ramp for pallet operations. The U-shaped DUG tables provide an open section that allows the pallet truck or its wheels to reach the load position. The standard DDG platform covers applications where a conventional rectangular deck is sufficient.
All three groups use a stationary electric lifting mechanism with 380 / 220 V supply options. The platform should be selected by load, required raised height, table dimensions and the route used by the pallet truck. For loads outside the listed standard sizes, the catalogue notes that tables up to 100 tons can be customised.
What equipment is included?
- Remote power pack with IP54 protection.
- Pedestal-style controls.
- Multiple hydraulic safety protections.
- Platform safety perimeter that stops descent when it touches an obstruction.
- Optional dust cover, rotary table, stainless steel deck, roller table, tilting top, galvanised finish and additional scissor stages.
Frequently asked questions
Which model needs the least floor depth?
The HL1000 and HL1500 have a 35 mm closed height. The DDG models close to 85 or 105 mm, and the DUG models use the same closed heights as the corresponding DDG sizes. Final floor preparation must follow the approved table drawing and site layout.
What is the U-shaped DUG table used for?
The open U section gives a pallet truck access to the underside of the load. DUG1000 provides a 1080 x 580 mm opening, while DUG1500 provides 1194 x 580 mm. The pallet dimensions and wheel position should be checked against those openings.
Can larger capacities be supplied?
Yes. The catalogue says the stationary lift table range can be customised up to 100 tons. Provide the load, platform size, raised height and floor conditions for a project-specific design.
Request a configuration
Send the pallet size, loaded weight, required table height, power supply and a plan of the loading position. We will confirm the DDG, DUG or HL model and prepare the matching drawing.





